OpenSourceSDRLab Palm-Sized Receive-Only ADS-B Receiver Board, No Subscription No Monthly Fee
Key features
No internet, no subscription — works offline, zero running costs
Two mainstream output formats — one for ground stations (Mission Planner and the MAVLink ecosystem), one for open-source tools; switch with a single command
Tunable sensitivity — boost it to reach farther; takes effect in seconds
Self-tuning on power-up — adapts to different antennas and RF modules, ready out of the box
Settings survive power-off — one command returns to factory defaults
Firmware update over one cable — through the same serial port, saved settings preserved
Plug and play — four wires to a USB-to-serial adapter; powered at 3.3V, draws about 10 mA
Open-source friendly — compatible with mainstream tools
Specifications
Power supply: 3.3V only (5V not supported)
Working current: approx. 10 mA
Interface: standard serial port, 115200 default, 9600 selectable
Receive band: ADS-B aviation broadcast band (1090 MHz), with matching antenna
Mode: receive only, no transmission



