Product instructions 1. Burn the IMG files from the image folder into an SD card 2. After burning, copy the files in the zc706_ update folder to the BOOT drive and replace the original files 3. Insert the SD card into the ZC706 card and set it to boot from the SD card 4. Connect the network cable and set the IP of ZC706 card through the serial port to ifconfig eth0 192.168.1.10 5. Open the ADRV9009 evaluation software and update the firmware file according to the prompts 6. Load the HTML file for testing purposes 7. Set the sending waveform and view the receiving waveform (if there are many spurious signals during reception, reduce the receiving gain)
